Inverter Charger Victron Energy Multiplus-II 24/3000/70-32
PMP242305010
The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an optional external current sensor that extends the PowerControl and PowerAssist functions up to 50A and 100A respectively.
The MultiPlus-II is ideal for professional use in marine, boating, vehicle and off-grid land applications.
It also has built-in anti-islanding functionality and approvals in increasing countries for use as an ESS. There are several possible system configurations. More detailed information can be found in the Design and Configuration Manual
of ESS systems.
An energy storage system (ESS) is a specific type of energy system that integrates a grid connection with a Victron inverter/charger, a Venus device and a battery system. It stores solar energy in its battery during the day, for later use when the sun stops shining.
PowerControl and PowerAssist – increase the capacity of the grid or of a generator
A maximum generator or mains current can be set. The MultiPlus-II will take into account the other AC loads and will use the excess current to charge the battery, thus avoiding overloading the generator or the network (PowerControl function).
PowerAssist takes the principle of PowerControl to another dimension. When a power peak is required for a short period of time, as is often the case, the MultiPlus-II will compensate for the lack of power from the generator, the shore power or the
the network with battery power. When the load is reduced, the remaining power is used to recharge the battery.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent